Search for: All records

Hydrofluorocarbons (HFC) are fluorinated compounds used globally for refrigeration. These gases have been shown to contain a greenhouse potential of up to 22,000 times that of CO2. Thus, 1298 type-5 deep eutectic solvents (DES) were examined for the absorption and interaction mechanisms of difluoromethane (R32), due to their non-polar attributes. Of these solvents, quaternary ammonium salts mixed with various species of hydrogen bond donators (HBD) produced the most favorable interactions, with ln activity coefficients predicted to be as low as −1.39 at 1:1 compositional ratio. These DES were further studied for compositional analysis where pure tetrabutylammonium bromide showed the strongest interaction potential. The pressure study showed a linear solubility increase with a pressure increase reaching up to 86 mol/mol% in a methyltrioctylammonium bromide and polyethylene glycol mixture at 9 bar. The van der Waals interaction is the driving force of absorption with ~3x enthalpic release over hydrogen bonding. All chemicals contain strong potential for an environmentally friendly solution, as is evident through an environmental health and safety analysis.

 

Hydrothermal carbonization (HTC) is a prominent thermochemical technology that can convert high-moisture waste into a valuable product (called hydrochar) at a relatively mild treatment condition (180–260 °C and 2–10 MPa). With rapidly growing research on HTC and hydrochar in recent years, review articles addressing the current and future direction of this research are scarce. Hence, this article aims to review various emerging applications of hydrochars, e.g., from solid fuel to soil amendment, from electron storage to hydrogen storage, from dye adsorption, toxin adsorption, heavy metal adsorption to nutrient recovery, and from carbon capture to carbon sequestration, etc. This article further provides an insight in the hydrochar’s working mechanism for various applications and how the applications can be improved through chemical modification of the hydrochar. Finally, new perspectives with appropriate recommendations have been made to further unveil potential applications and its improvement through hydrochar and its modified version.

 

Deep eutectic solvents (DES) are compounds of a hydrogen bond donor (HBD) and a hydrogen bond acceptor (HBA) that contain a depressed melting point compared to their individual constituents. DES have been studied for their use as carbon capture media and biogas upgrading. However, contaminants’ presence in biogas might affect the carbon capture by DES. In this study, conductor-like screening model for real solvents (COSMO-RS) was used to determine the effect of temperature, pressure, and selective contaminants on five DES’ namely, choline chloride-urea, choline chloride-ethylene glycol, tetra butyl ammonium chloride-ethylene glycol, tetra butyl ammonium bromide-decanoic acid, and tetra octyl ammonium chloride-decanoic acid. Impurities studied in this paper are hydrogen sulfide, ammonia, water, nitrogen, octamethyltrisiloxane, and decamethylcyclopentasiloxane. At infinite dilution, CO2 solubility dependence upon temperature in each DES was examined by means of Henry’s Law constants. Next, the systems were modeled from infinite dilution to equilibrium using the modified Raoults’ Law, where CO2 solubility dependence upon pressure was examined. Finally, solubility of CO2 and CH4 in the various DES were explored with the presence of varying mole percent of selective contaminants. Among the parameters studied, it was found that the HBD of the solvent is the most determinant factor for the effectiveness of CO2 solubility. Other factors affecting the solubility are alkyl chain length of the HBA, the associated halogen, and the resulting polarity of the DES. It was also found that choline chloride-urea is the most selective to CO2, but has the lowest CO2 solubility, and is the most polar among other solvents. On the other hand, tetraoctylammonium chloride-decanoic acid is the least selective, has the highest maximum CO2 solubility, is the least polar, and is the least affected by its environment. 

Hydrogen (H2) is largely regarded as a potential cost-efficient clean fuel primarily due to its beneficial properties, such as its high energy content and sustainability. With the rising demand for H2 in the past decades and its favorable characteristics as an energy carrier, the escalating USA consumption of pure H2 can be projected to reach 63 million tons by 2050. Despite the tremendous potential of H2 generation and its widespread application, transportation and storage of H2 have remained the major challenges of a sustainable H2 economy. Various efforts have been undertaken by storing H2 in activated carbons, metal organic frameworks (MOFs), covalent organic frameworks (COFs), etc. Recently, the literature has been stressing the need to develop biomass-based activated carbons as an effective H2 storage material, as these are inexpensive adsorbents with tunable chemical, mechanical, and morphological properties. This article reviews the current research trends and perspectives on the role of various properties of biomass-based activated carbons on its H2 uptake capacity. The critical aspects of the governing factors of H2 storage, namely, the surface morphology (specific surface area, pore volume, and pore size distribution), surface functionality (heteroatom and functional groups), physical condition of H2 storage (temperature and pressure), and thermodynamic properties (heat of adsorption and desorption), are discussed. A comprehensive survey of the literature showed that an “ideal” biomass-based activated carbon sorbent with a micropore size typically below 10 Å, micropore volume greater than 1.5 cm3/g, and high surface area of 4000 m2/g or more may help in substantial gravimetric H2 uptake of >10 wt% at cryogenic conditions (−196 °C), as smaller pores benefit by stronger physisorption due to the high heat of adsorption. 

The aim of this research was to evaluate the technoeconomic prospect of hydrochar production through co-hydrothermal carbonization of coal waste (CW) and food waste (FW). A process flow diagram was developed that considered seven reactors, six pumps, and other necessary equipment for producing 49,192 kg/h hydrochar. Three different cases were considered for the economic analysis. Case II considered both CW and FW transportation cost while cases I and III considered only FW and only CW transportation, respectively. The economic analysis revealed the break-even costs to be $62.24 per ton for case I, $69.90 per ton for case II, and $60.26 per ton for case III. The fixed capital investment (FCI) was $11.4M for all the cases while total capital investment (TCI), working capital (WC), and manufacturing costs were higher for case II compared to cases I and III. A sensitivity analysis examined the effect of nine different variables on the break-even cost. The raw materials’ cost as well as their transportation costs significantly affected the corresponding break-even cost. Additionally, increasing the hydrochar production capacity has drastically decreased the break-even cost. However, the analysis also revealed that excessive increase of production capacity can have negative impact on the process economics.